Bosch · Dishwasher · Fault guide

Bosch Dishwasher E04 error

ErrorE04

E04 is identified by Bosch support as a dishwasher water-heating or temperature condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E04 means

Bosch Dishwasher E04: a dishwasher water-heating or temperature condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English.

Model scope
Bosch dishwasher models covered by the linked Bosch official error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official home-appliance error-code support.

Open official source ↗
✓
What the code means

a dishwasher water-heating or temperature condition

Isolate the appliance when safe. Record the exact model and code, do not open the appliance, and arrange Bosch service if E04 returns. Do not open fixed panels or test live circuits.

Typical symptoms

01E04 is shown on the Bosch dishwasher display, indicator, or connected app
02The published condition is: a dishwasher water-heating or temperature condition
03The measured temperature condition does not match the operating range represented by E04
04The important observation is when E04 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a dishwasher water-heating or temperature condition
02E04 identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault
03Model boundary — apply this interpretation only to Bosch dishwasher models covered by the linked Bosch official error-code support page

Safe next steps

  1. 1
    Confirm the exact Bosch Dishwasher E04 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E04 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a dishwasher water-heating or temperature condition
  4. 4
    Published check — Record the exact model and code, do not open the appliance, and arrange Bosch service if E04 returns
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Bosch does not specify for E04
  7. 7
    Published check — Give service the E04 photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E04

Service-safe actions

  1. 1
    Record the exact model and code, do not open the appliance, and arrange Bosch service if E04 returns
  2. 2
    Give service the E04 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E04 cost planning: €0 for cooldown and external checks. If E04 returns at normal conditions, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing.
⏱Time for the first check
E04 time plan: 15–60 minutes for safe cooldown or temperature normalization; professional electrical diagnosis usually takes 30–90 minutes.
🔧Tools
Timer, Exact-model cooldown and ventilation instructions, No live temperature-sensor or mains-voltage test equipment
▣Parts or consumables
E04 parts decision: None for cooldown or external ventilation checks. E04 may identify a temperature-related area, but it does not establish the exact sensor, heater, fan, or control part.

What not to do

  • Do not defeat thermal protection, apply external heat, test a live sensor circuit, or restart repeatedly before the appliance has cooled
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E04

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    If E04 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E04 identify?

Bosch identifies it as a dishwasher water-heating or temperature condition.

Which action is actually supported for E04?

Record the exact model and code, do not open the appliance, and arrange Bosch service if E04 returns; Give service the E04 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E04?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E04 prove which part failed?

No. It identifies “a dishwasher water-heating or temperature condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E04 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.