Bosch · Dishwasher · Fault guide

Bosch Dishwasher E6101 error

ErrorE6101

E6101 is listed by Bosch support as drain-pump fault or blockage. The exact checks and component layout can vary by model and region.

Quick answer

What E6101 means

Bosch Dishwasher E6101: Drain-pump fault or blockage. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English.

Model scope
Bosch dishwasher models covered by the linked Bosch US error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official dishwasher error-code support.

Open official source ↗
✓
What the code means

Drain-pump fault or blockage

Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks.

Typical symptoms

01The dishwasher cannot finish draining
02Standing water remains and the pump may hum or stay silent
03E6101 points to a blocked, clogged, or faulty drain pump

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Drain-pump fault or blockage

Safe next steps

  1. 1
    Confirm the exact Bosch Dishwasher E6101 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E6101 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: Drain-pump fault or blockage
  4. 4
    Confirm that the observed condition matches the published meaning: a blocked, clogged, or faulty drain-pump condition
  5. 5
    Published check — Clean only the user-accessible filter area described by Bosch
  6. 6
    Published check — contact Bosch Customer Support if E6101 remains
  7. 7
    Stop at the published service boundary after these actions
  8. 8
    do not add a restart or test cycle that Bosch does not specify for E6101
  9. 9
    Published check — Give service the E6101 photo, full model and serial number, when it appeared, and the result of every published external check
  10. 10
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E6101

Service-safe actions

  1. 1
    Clean only the user-accessible filter area described by Bosch
  2. 2
    contact Bosch Customer Support if E6101 remains
  3. 3
    Give service the E6101 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E6101 cost planning: €0 for an accessible blockage check; typically €10–€45 for a confirmed hose, cap, or seal. A diagnosed pump repair commonly moves into the €90–€220 service range before parts.
⏱Time for the first check
E6101 time plan: 15–35 minutes to drain safely, inspect accessible points, refit them, and run one short drain test.
🔧Tools
Dry towels, shallow tray, and household gloves, Flashlight, A coin or hand grip only if the exact-model manual permits opening the user-accessible filter cover
▣Parts or consumables
E6101 parts decision: Usually none for clearing an accessible filter or hose. A drain pump is not confirmed by E6101; match any pump, cover, seal, or hose to the full model only after diagnosis.

What not to do

  • Do not force a jammed pump cover, tip an appliance containing water, or reach into the pump area while power is connected
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E6101

Preventive maintenance

  • 1
    Keep user-accessible filters, seals, hoses, and drain connections clean and inspect them periodically for damage or seepage
  • 2
    If E6101 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E6101 identify?

Bosch identifies it as Drain-pump fault or blockage.

Which action is actually supported for E6101?

Clean only the user-accessible filter area described by Bosch; contact Bosch Customer Support if E6101 remains; Give service the E6101 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E6101?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E6101 prove which part failed?

No. It identifies “Drain-pump fault or blockage”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E6101 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.