Hotpoint · Dishwasher · Fault guide

Hotpoint dishwasher F02 error

ErrorF02

Hotpoint identifies dishwasher F02 as a water-fill solenoid-valve failure and recommends booking an engineer.

Quick answer

What F02 means

Hotpoint Dishwasher F02: The water-fill solenoid valve has failed. This interpretation applies to Hotpoint dishwasher models covered by the linked UK error-code table in United Kingdom / English.

Model scope
Hotpoint dishwasher models covered by the linked UK error-code table
Region
United Kingdom / English
Verified
✓

Primary evidence: Hotpoint UK dishwasher error-code support.

Open official source ↗
✓
What the code means

The water-fill solenoid valve has failed

Turn off the water supply if the dishwasher is filling unexpectedly. Do not open the inlet valve or test mains-connected components; book an engineer.

Typical symptoms

01F02 is shown by the dishwasher LED sequence
02The dishwasher may not fill correctly
03The programme may stop before washing begins

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01A water-fill solenoid-valve failure
02A model-specific inlet-control fault

Safe next steps

  1. 1
    Confirm the exact Hotpoint Dishwasher F02 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F02 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Hotpoint dishwasher models covered by the linked UK error-code table
  3. 3
    Confirm that the observed condition matches the published meaning: The water-fill solenoid valve has failed
  4. 4
    Record the F02 LED sequence and exact Hotpoint model
  5. 5
    Turn off water if the dishwasher is filling unexpectedly
  6. 6
    Do not open the inlet valve or mains-connected components
  7. 7
    Book a Hotpoint engineer and quote F02
  8. 8
    Published check — Hotpoint identifies dishwasher F02 as a water-fill solenoid-valve failure and recommends an engineer
  9. 9
    Published check — No user-level valve replacement is verified
  10. 10
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F02 remains, stop and move to exact-model diagnosis

Service-safe actions

  1. 1
    Hotpoint identifies dishwasher F02 as a water-fill solenoid-valve failure and recommends an engineer
  2. 2
    No user-level valve replacement is verified
  3. 3
    If F02 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
F02 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If F02 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Hotpoint pricing.
⏱Time for the first check
F02 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
F02 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Hotpoint model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not test live components, bypass the inlet valve, or order a valve without model-specific diagnosis
  • Do not turn F02 into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    Keep the water supply and fill hose installed as the Hotpoint manual specifies and inspect for visible leaks
  • 3
    If F02 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F02 identify?

Hotpoint identifies it as The water-fill solenoid valve has failed.

Which action is actually supported for F02?

Hotpoint identifies dishwasher F02 as a water-fill solenoid-valve failure and recommends an engineer; No user-level valve replacement is verified.

What result matters after the F02 check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does F02 prove which part failed?

No. It identifies “The water-fill solenoid valve has failed”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F02 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.