Miele · Dishwasher · Fault guide

Miele Dishwasher F78 error

ErrorF78

F78 is identified by Miele's official manual as circulation-pump fault. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F78 means

Miele Dishwasher F78: circulation-pump fault. This interpretation applies to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 in United Kingdom / English.

Model scope
Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2
Region
United Kingdom / English
Verified
✓

Primary evidence: Miele official dishwasher operating instructions.

Open official source ↗
✓
What the code means

circulation-pump fault

Isolate the appliance when safe. Switch the dishwasher off, restart it once, and close the stopcock if F78 returns; contact Miele Service rather than opening the pump or electrical system. Do not open fixed panels or test live circuits.

Typical symptoms

01F78 is shown on the Miele dishwasher display, indicator, or connected app
02The published condition is: circulation-pump fault
03The documented fan or circulation function is not confirmed while F78 is active
04The important observation is when F78 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — circulation-pump fault
02F78 identifies the circulation path but does not alone prove the fan motor, obstruction, wiring, sensor, or control failed
03Model boundary — apply this interpretation only to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2

Safe next steps

  1. 1
    Confirm the exact Miele Dishwasher F78 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F78 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2
  3. 3
    Confirm that the observed condition matches the published meaning: circulation-pump fault
  4. 4
    Published check — Switch the dishwasher off, restart it once, and close the stopcock if F78 returns
  5. 5
    Published check — contact Miele Service rather than opening the pump or electrical system
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F78
  8. 8
    Published check — Give service the F78 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F78

Service-safe actions

  1. 1
    Switch the dishwasher off, restart it once, and close the stopcock if F78 returns
  2. 2
    contact Miele Service rather than opening the pump or electrical system
  3. 3
    Give service the F78 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F78 cost planning: Accessible airflow cleaning is usually €0. A qualified fan or circulation diagnosis is generally planned within €90–€220 before parts.
⏱Time for the first check
F78 time plan: 10–25 minutes for the documented F78 airflow or obstruction check; professional fan/circulation diagnosis commonly takes 30–90 minutes.
🔧Tools
Photo of F78, Flashlight for user-accessible vents or obstructions, Soft brush or vacuum only where the exact manual permits, No live fan-circuit test equipment
▣Parts or consumables
F78 parts decision: F78 identifies circulation-pump fault. Clear only a documented accessible obstruction; a fan, motor, duct, sensor, wiring, or control part requires exact-model diagnosis.

What not to do

  • Do not reach into a moving fan, force an iced or jammed blade, push debris into a duct, or operate without required covers or filters
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F78

Preventive maintenance

  • 1
    Follow the exact Miele maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    If F78 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F78 identify?

Miele identifies it as circulation-pump fault.

Which action is actually supported for F78?

Switch the dishwasher off, restart it once, and close the stopcock if F78 returns; contact Miele Service rather than opening the pump or electrical system; Give service the F78 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F78?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F78 prove which part failed?

No. It identifies “circulation-pump fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F78 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.