Samsung · Dishwasher · Fault guide

Samsung dishwasher HC error

ErrorHC

Samsung identifies HC as a high-temperature heater error. Follow the empty Normal-cycle check exactly once, then request service if HC returns.

Quick answer

What HC means

Samsung Dishwasher HC: The dishwasher temperature is too high. This interpretation applies to Samsung US dishwasher models covered by the linked official error-code guidance in United States / English.

Model scope
Samsung US dishwasher models covered by the linked official error-code guidance
Region
United States / English
Verified
✓

Primary evidence: Samsung US dishwasher error-code support.

Open official source ↗
✓
What the code means

The dishwasher temperature is too high

Do not open the dishwasher while it is hot or test heater wiring. Keep clear of steam and use service if the code returns after the official check.

Typical symptoms

01HC appears during or after a cycle
02The dishwasher temperature is detected as too high
03The code returns after the official test cycle

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01An overheating or heater-control condition
02A model-specific temperature or control fault

Safe next steps

  1. 1
    Confirm the exact Samsung Dishwasher HC model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete HC display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Samsung US dishwasher models covered by the linked official error-code guidance
  3. 3
    Confirm that the observed condition matches the published meaning: The dishwasher temperature is too high
  4. 4
    Record HC and let the dishwasher cool if it is hot
  5. 5
    Switch power off at the circuit breaker for 30 seconds and restore it
  6. 6
    Empty the dishwasher, fill the detergent drawer, and run one Normal cycle as Samsung directs
  7. 7
    Stop if there is steam, a burning smell, or abnormal heat
  8. 8
    Request service if HC returns
  9. 9
    Published check — Perform Samsung's single 30-second power interruption and empty Normal-cycle test
  10. 10
    Published check — There is no verified user-level heater repair for HC

Service-safe actions

  1. 1
    Perform Samsung's single 30-second power interruption and empty Normal-cycle test
  2. 2
    There is no verified user-level heater repair for HC
  3. 3
    arrange service when the code returns
  4. 4
    Give service the HC photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
HC cost planning: €0 for the published breaker, plug, or power-restoration check. If the household supply or appliance wiring needs diagnosis, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Samsung pricing.
⏱Time for the first check
HC time plan: The official action includes 30-second. 5–15 minutes to document HC and complete the published power check; allow 30–90 minutes for a qualified supply or appliance diagnosis.
🔧Tools
Phone photo of the complete HC display, Full model and serial number, Access to the household breaker or plug only as the official instructions permit, No live-voltage test equipment for an owner check
▣Parts or consumables
HC parts decision: HC documents The dishwasher temperature is too high. It does not by itself distinguish the appliance, cord, outlet, breaker, or installation wiring as the failed item; a qualified electrical check must locate the fault before parts are ordered.

What not to do

  • Do not use an extension lead, bypass a tripping breaker, open a plug or control enclosure, or measure live mains voltage
  • Stop immediately if HC follows heat, arcing, smoke, or a burning smell
  • Do not repeat resets, open heater wiring, run another cycle with abnormal heat, or order a heater from HC alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for HC

Preventive maintenance

  • 1
    Follow the exact Samsung maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    Use the detergent and cycle settings in the exact model manual and stop promptly if abnormal heat appears
  • 3
    If HC begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does HC identify?

Samsung identifies it as The dishwasher temperature is too high.

Which action is actually supported for HC?

Perform Samsung's single 30-second power interruption and empty Normal-cycle test; There is no verified user-level heater repair for HC; arrange service when the code returns.

Can I run another test after HC?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does HC prove which part failed?

No. It identifies “The dishwasher temperature is too high”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The HC photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.