Vaillant · Heat pump · Fault guide

Vaillant Heat pump F.703 error

ErrorF.703

F.703 is identified by Vaillant support as low refrigerant-pressure sensor fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What F.703 means

Vaillant Heat pump F.703: low refrigerant-pressure sensor fault. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English.

Model scope
Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
Region
United Kingdom / English
Verified
✓

Primary evidence: Vaillant UK official heat-pump fault-code support.

Open official source ↗
!
Stop and make safe

low refrigerant-pressure sensor fault

Isolate the appliance when safe. Arrange Vaillant engineer service; do not test the low-pressure sensor, refrigerant charge, or expansion valve yourself. Do not open fixed panels or test live circuits.

Typical symptoms

01F.703 is shown on the Vaillant heat pump display, indicator, or connected app
02The published condition is: low refrigerant-pressure sensor fault
03The control cannot confirm the documented measured condition or sensor reference represented by F.703
04The important observation is when F.703 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — low refrigerant-pressure sensor fault
02F.703 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page

Safe next steps

  1. 1
    Confirm the exact Vaillant Heat pump F.703 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F.703 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
  3. 3
    Confirm that the observed condition matches the published meaning: low refrigerant-pressure sensor fault
  4. 4
    Published check — Arrange Vaillant engineer service
  5. 5
    Published check — do not test the low-pressure sensor, refrigerant charge, or expansion valve yourself
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Vaillant does not specify for F.703
  8. 8
    Published check — Give service the F.703 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.703

Service-safe actions

  1. 1
    Arrange Vaillant engineer service
  2. 2
    do not test the low-pressure sensor, refrigerant charge, or expansion valve yourself
  3. 3
    Give service the F.703 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F.703 cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €140–€320 before any model-specific part is approved.
⏱Time for the first check
F.703 time plan: 10–20 minutes for the documented F.703 external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
🔧Tools
Photo of the complete F.703 display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
▣Parts or consumables
F.703 parts decision: F.703 describes low refrigerant-pressure sensor fault; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.

What not to do

  • Do not bridge, heat, cool, wet, or electrically probe a sensor to clear F.703
  • Do not replace a sensor until its circuit and the condition it measures have been checked
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F.703

Preventive maintenance

  • 1
    Follow the exact Vaillant maintenance schedule for the heat pump and keep the model, serial number, and service history available
  • 2
    If F.703 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F.703 identify?

Vaillant identifies it as low refrigerant-pressure sensor fault.

Which action is actually supported for F.703?

Arrange Vaillant engineer service; do not test the low-pressure sensor, refrigerant charge, or expansion valve yourself; Give service the F.703 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F.703?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F.703 prove which part failed?

No. It identifies “low refrigerant-pressure sensor fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F.703 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.