Vaillant · Heat pump · Fault guide

Vaillant Heat pump F.729 error

ErrorF.729

F.729 is identified by Vaillant support as compressor outlet temperature too low. Follow the official, model-scoped checks and service boundary below.

Quick answer

What F.729 means

Vaillant Heat pump F.729: compressor outlet temperature too low. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English.

Model scope
Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
Region
United Kingdom / English
Verified
✓

Primary evidence: Vaillant UK official heat-pump fault-code support.

Open official source ↗
✓
What the code means

compressor outlet temperature too low

Isolate the appliance when safe. Arrange Vaillant engineer service for the sensors, pressure circuit, expansion valve, four-way valve, and refrigerant diagnosis. Do not open fixed panels or test live circuits.

Typical symptoms

01F.729 is shown on the Vaillant heat pump display, indicator, or connected app
02The published condition is: compressor outlet temperature too low
03The measured temperature condition does not match the operating range represented by F.729
04The important observation is when F.729 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — compressor outlet temperature too low
02F.729 identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault
03Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page

Safe next steps

  1. 1
    Confirm the exact Vaillant Heat pump F.729 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F.729 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
  3. 3
    Confirm that the observed condition matches the published meaning: compressor outlet temperature too low
  4. 4
    Published check — Arrange Vaillant engineer service for the sensors, pressure circuit, expansion valve, four-way valve, and refrigerant diagnosis
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Vaillant does not specify for F.729
  7. 7
    Published check — Give service the F.729 photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.729

Service-safe actions

  1. 1
    Arrange Vaillant engineer service for the sensors, pressure circuit, expansion valve, four-way valve, and refrigerant diagnosis
  2. 2
    Give service the F.729 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F.729 cost planning: €0 for cooldown and external checks. If F.729 returns at normal conditions, €140–€320 is a typical Europe planning range for diagnosis before parts; it is not Vaillant pricing.
⏱Time for the first check
F.729 time plan: 15–60 minutes for safe cooldown or temperature normalization; professional electrical diagnosis usually takes 30–90 minutes.
🔧Tools
Timer, Exact-model cooldown and ventilation instructions, No live temperature-sensor or mains-voltage test equipment
▣Parts or consumables
F.729 parts decision: None for cooldown or external ventilation checks. F.729 may identify a temperature-related area, but it does not establish the exact sensor, heater, fan, or control part.

What not to do

  • Do not defeat thermal protection, apply external heat, test a live sensor circuit, or restart repeatedly before the appliance has cooled
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F.729

Preventive maintenance

  • 1
    Follow the exact Vaillant maintenance schedule for the heat pump and keep the model, serial number, and service history available
  • 2
    If F.729 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F.729 identify?

Vaillant identifies it as compressor outlet temperature too low.

Which action is actually supported for F.729?

Arrange Vaillant engineer service for the sensors, pressure circuit, expansion valve, four-way valve, and refrigerant diagnosis; Give service the F.729 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F.729?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F.729 prove which part failed?

No. It identifies “compressor outlet temperature too low”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F.729 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.