AEG · Dishwasher · Fault guide

AEG dishwasher i28 code

Errori28

i28 is described by AEG support as drain-pump malfunction. Exact checks and component access vary by model and region.

Quick answer

What i28 means

AEG Dishwasher i28: Drain-pump malfunction. This interpretation applies to AEG dishwashers covered by the linked support article in United Kingdom / English.

Model scope
AEG dishwashers covered by the linked support article
Region
United Kingdom / English
Verified
✓

Primary evidence: AEG support: dishwasher i28.

Open official source ↗
✓
What the code means

Drain-pump malfunction

Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks.

Typical symptoms

01i28 is shown on the AEG dishwasher display, indicator, or connected app
02The published condition is: Drain-pump malfunction
03Water or condensate does not leave through the documented drain path as expected while i28 is active
04The important observation is when i28 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — Drain-pump malfunction
02i28 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked
03Model boundary — apply this interpretation only to AEG dishwashers covered by the linked support article

Safe next steps

  1. 1
    Confirm the exact AEG Dishwasher i28 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete i28 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked support article
  3. 3
    Confirm that the observed condition matches the published meaning: Drain-pump malfunction
  4. 4
    Stop the dishwasher
  5. 5
    Close the water tap
  6. 6
    Record the exact error code and appliance model number
  7. 7
    Contact an AEG Authorised Service Centre
  8. 8
    Published check — AEG identifies i28 as a drain-pump malfunction
  9. 9
    Published check — Its published instruction is to close the water tap and contact an Authorised Service Centre
  10. 10
    Published check — No external drain-pump repair is verified for this code

Service-safe actions

  1. 1
    AEG identifies i28 as a drain-pump malfunction
  2. 2
    Its published instruction is to close the water tap and contact an Authorised Service Centre
  3. 3
    No external drain-pump repair is verified for this code
  4. 4
    Give service the i28 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
i28 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If i28 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not AEG pricing.
⏱Time for the first check
i28 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
i28 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact AEG model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not remove or electrically test the drain pump
  • Do not run repeated drain cycles
  • Do not open fixed panels or work on live components
  • Do not keep using the dishwasher with standing water
  • Do not run an extra test cycle after the source tells you to stop or arrange service for i28

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    Keep the model number and exact code available for service
  • 3
    Act promptly if water is present around the appliance
  • 4
    If i28 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does i28 identify?

AEG identifies it as Drain-pump malfunction.

Which action is actually supported for i28?

AEG identifies i28 as a drain-pump malfunction; Its published instruction is to close the water tap and contact an Authorised Service Centre; No external drain-pump repair is verified for this code.

Can I run another test after i28?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does i28 prove which part failed?

No. It identifies “Drain-pump malfunction”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The i28 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.