AEG · Dishwasher · Fault guide

AEG dishwasher i90–i99 code

Errori90–i99

i90–i99 is described by AEG support as dishwasher electronics or communication fault. Exact checks and component access vary by model and region.

Quick answer

What i90–i99 means

AEG Dishwasher i90–i99: Dishwasher electronics or communication fault. This interpretation applies to AEG dishwashers covered by the linked support article in United Kingdom / English.

Model scope
AEG dishwashers covered by the linked support article
Region
United Kingdom / English
Verified
✓

Primary evidence: AEG support: dishwasher i90–i99.

Open official source ↗
✓
What the code means

Dishwasher electronics or communication fault

Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks.

Typical symptoms

01i90–i99 is shown on the AEG dishwasher display, indicator, or connected app
02The published condition is: Dishwasher electronics or communication fault
03The appliance has reached the manufacturer-defined stop or service condition associated with i90–i99
04The important observation is when i90–i99 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — Dishwasher electronics or communication fault
02i90–i99 defines a service boundary; the failed internal part still requires exact-model diagnosis
03Model boundary — apply this interpretation only to AEG dishwashers covered by the linked support article

Safe next steps

  1. 1
    Confirm the exact AEG Dishwasher i90–i99 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete i90–i99 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked support article
  3. 3
    Confirm that the observed condition matches the published meaning: Dishwasher electronics or communication fault
  4. 4
    Disconnect the dishwasher from power for at least two hours
  5. 5
    Restore power
  6. 6
    Run any program once
  7. 7
    If the code returns, record the PNC, serial number, and purchase date
  8. 8
    Contact AEG Customer Service
  9. 9
    Published check — For i90 through i99, AEG publishes a two-hour power disconnection followed by one program test
  10. 10
    Published check — If that does not resolve the code, contact Customer Service with the appliance PNC, serial number, and purchase date

Service-safe actions

  1. 1
    For i90 through i99, AEG publishes a two-hour power disconnection followed by one program test
  2. 2
    If that does not resolve the code, contact Customer Service with the appliance PNC, serial number, and purchase date
  3. 3
    No component-level DIY repair is verified
  4. 4
    Give service the i90–i99 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
i90–i99 cost planning: The source-listed safety check is usually €0. €90–€220 is a typical Europe planning range for diagnosis before parts; it is not AEG pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
⏱Time for the first check
i90–i99 time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
🔧Tools
Phone camera for the complete i90–i99 display, Full model and serial number, Power or water isolation access as described by the official procedure
▣Parts or consumables
i90–i99 parts decision: No component should be ordered from i90–i99 alone. The documented fault area is “Dishwasher electronics or communication fault”; the technician must identify the failed model-specific part and revision.

What not to do

  • Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
  • Do not repeatedly reset the appliance
  • Do not open the control area or fixed panels
  • Do not test live electronics
  • Do not order an electronic module from the code alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for i90–i99

Preventive maintenance

  • 1
    Follow the exact AEG maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    Keep the PNC and serial number recorded for support
  • 3
    Avoid interrupting power repeatedly while an error is active
  • 4
    If i90–i99 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does i90–i99 identify?

AEG identifies it as Dishwasher electronics or communication fault.

Which action is actually supported for i90–i99?

For i90 through i99, AEG publishes a two-hour power disconnection followed by one program test; If that does not resolve the code, contact Customer Service with the appliance PNC, serial number, and purchase date; No component-level DIY repair is verified.

Can I run another test after i90–i99?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does i90–i99 prove which part failed?

No. It identifies “Dishwasher electronics or communication fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The i90–i99 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.