Bosch · Dishwasher · Fault guide

Bosch Dishwasher E3300 error

ErrorE3300

E3300 is identified by Bosch support as a dishwasher filling-system water-flow fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E3300 means

Bosch Dishwasher E3300: a dishwasher filling-system water-flow fault. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English.

Model scope
Bosch dishwasher models covered by the linked Bosch US error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official dishwasher error-code support.

Open official source ↗
✓
What the code means

a dishwasher filling-system water-flow fault

Follow the exact model manual. Check the visible inlet hose for kinks and confirm the water supply is on; contact Bosch Customer Support if the code remains. Do not open fixed panels or test live circuits.

Typical symptoms

01E3300 appears on the dishwasher display
02The a dishwasher filling-system water-flow fault condition may stop, pause, or limit the appliance
03The same code returns when the model-specific condition remains active

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01a dishwasher filling-system water-flow fault
02The exact model manual must be used before any internal diagnosis

Safe next steps

  1. 1
    Confirm the exact Bosch Dishwasher E3300 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete E3300 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a dishwasher filling-system water-flow fault
  4. 4
    Published check — Check the visible inlet hose for kinks and confirm the water supply is on
  5. 5
    Published check — contact Bosch Customer Support if the code remains
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Bosch does not specify for E3300
  8. 8
    Published check — Give service the E3300 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E3300

Evidence-backed actions

  1. 1
    Check the visible inlet hose for kinks and confirm the water supply is on
  2. 2
    contact Bosch Customer Support if the code remains
  3. 3
    Give service the E3300 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E3300 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If E3300 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing.
⏱Time for the first check
E3300 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
E3300 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Bosch model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E3300

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If E3300 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E3300 identify?

Bosch identifies it as a dishwasher filling-system water-flow fault.

Which action is actually supported for E3300?

Check the visible inlet hose for kinks and confirm the water supply is on; contact Bosch Customer Support if the code remains; Give service the E3300 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E3300?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E3300 prove which part failed?

No. It identifies “a dishwasher filling-system water-flow fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E3300 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.